Trasparenza: disponibile in trasparente e opaco (colore: verde/nero), Materiale: strato interno in PVC duro, strati superiori in PVC morbido, Strati di materiale: a tre strati (trasparente) o a 5 strati (verde/nero)
Lame di ricambio a tratti, standard
from 1,20 €
come in translucent plastic case
from 2,90 €
round aluminium handle, knurled grip zone, includes protective cap
Riga in acciaio inossidabile, pieghevole
from 1,90 €
conforms to DIN ISO 2768 m/EC class ll, reads from left to right, flexible construction (th = 0.5 mm), rust-free spring band steel, non-glare, matte-finished surface, etched graduation: upper edge 1/1 mm, lower edge...
from 0,80 €
light coloured clear varnished wooden handle, ergonomic shape, brass bush, point ø 1.9 mm
Rulli pressori standard
from 16,50 €
5 mm thick hard-wearing, pressure elastic plastic covering, waterproof and limited oil-resistance, aluminium core with plastic hubs, sturdy flat steel support frame, nickel-plated, beech handle with transparent...
Taglierino Ecobra per lame 9 mm., argento
from 3,90 €
silver aluminium handle with chromed steel clip, unrestricted feeder, positioning lock screw, blade in metal guide
Riga in acciaio inossidabile, rigida
from 4,50 €
conforms to EC class II, reads from left to right, stiff construction (th = 1.0 – 1.4 mm), rust-free spring band steel, etched or engraved graduation: upper edge 1/1 mm und lower edge 1/2 mm, conversion table...
Righello da taglio alluminio bordo acciaio,sottile
from 10,60 €
anodised aluminium, steel edge for cutting or ink drawing/aluminium bevelled edge with imprinted mm graduation, with hanging hole and anti-slip reverse side (rubber), in soft plastic case, th = 5.0 mm, w = 38 mm
from 4,60 €
forged steel, shaft is stove-enamelled, cutting edge is hardened and tempered, cutting nose is polished bright, conforms to hollow punch norm DIN 7200: form A, made in Germany
Righello da taglio Ulmer in acciaio, con smusso
from 26,50 €
chrome-nickel steel, rust-free, with engraved mm scale, has knob for easy handling, hanging hole, thickness = 3 mm and width = 40 mm (for the 300 and 500 mm long versions); th = 4 mm and w = 50 mm (for the l = 1000...
Righello da disegno e da taglio, acrilico
from 9,30 €
transparent, steel edge and bevelled edge, raised nubs, partial silicone strips, coloured grid and graduation, th = app. 3.0 mm
Squadra da taglio Ulmer in acciaio, con smusso
from 23,80 €
steel, open-worked with a bar in the middle, painted grey, bevelled edge on a side piece, without graduation, knob for gripping, th = 2 mm
Tagliapolistirolo Styrocut 3
from 665,00 €
piano di lavoro: multiplex rivestito con foglio di alluminio anodizzato e retinato, dimensioni del piano di lavoro: 265 x 610 mm, angolo di battuta: le guide si muovono lungo il lato su cuscinetti a sfera, registrabile sul fronte e sul retro con 2 tamponi ammortizzanti regola ...
Taglierino per lame 9/18 mm. con caricatore
from 4,70 €
grey plastic handle with black gummed grip zone, slide brake, notched feeder with auto-stop function, blade in metal guide, magazine with blades in handle which can be automatically reloaded
Righello all. Da taglio con bordo guida in acciaio
from 10,50 €
thin, anodized aluminium, incumbent steel edge for cutting and laying out templates, aluminium beveled face with imprinted mm graduation, anti-slip (rubberized) reverse side, comes in soft plastic case, th = 6 mm, w...
Set arnesi di modellazione n°1
from 11,00 €
birchwood, raw, l = 150 mm
Taglierino per tagli a V Foamwerks WC-2001
from 32,70 €
Cutter for exact V-groove cuts and 45° passepartout cuts in sandwich panels with 3 – 10 mm thicknesses, plastic housing with flexible cutting head, adjustable blade depth, on-board blade storage drawer, blade...
round plastic barrel with roll preventer (hexagon ring on barrel end), light-alloy internal mechanism, ribbed light-alloy locking piece, includes protective cap and one replacement blade in a plastic container
Guanti in cotone bianchi, sottili
from 1,20 €
100% cotton, washable up to 95° C
Squadra per officina
from 5,50 €
steel, galvanised, th = 5 mm
Sega termica Proxxon Thermocut
from 109,00 €
injection mould plastic housing, aluminium-cobond covered laminated panel (Alu/PE) 280 x 390 mm (with printed grid and protractor), adjustable fence in 2-sided guide groove, solid aluminium overarm with lateral jaw...
Parti di ricambio per sega circolare x banco FET
from 7,80 €
Taglierino angoli retti/acuti Foamwerks WC-6010
from 24,50 €
cutter for 90° and 45° cuts in sandwich panels with up to 5 mm thicknesses, plastic housing with adjustable angle, adjustable blade depth, on-board blade storage area
Olfa SVR-2 utility knife, 9 mm blades
from 8,90 €
Body: stainless steel handle and clip, Stepped feed: with Auto-Stop, Package contents: cutter with blade, 2 replacement blades, Packaging: blister pack
Ecobra metal cutter, silver
from 3,50 €
Material: full metal housing, steel blade, Colour: silver, Attributes: metal cutter guide, notched slider, auto lock, Configuration: with hole for hanging, clip and breakoff device
Tagliapolistirolo Styrocut 2
from 619,00 €
multiplex worktop 265 x 410 mm covered with anodised chequered aluminium, guide bar moves along the side on ball bearings, front and back adjustable buffers, topside wire mounted on adjustable slides, adjustable...
Filo da taglio per seghe termiche
from 1,95 €
NiCr 8020 hot cutting wire
Taglierino per lame 18 mm. con vite
from 4,10 €
plastic handle with cushioned grip, notched feeder, positioning lock screw, blade in metal guide, snap-off aid
Taglierino per angoli retti Foamwerks WC-6001
from 25,90 €
Cutter for exact 90° cuts in sandwich panels with 3 – 10 mm thicknesses, plastic housing with flexible cutting head, adjustable blade depth, on-board blade storage drawer, blade holder with set screw and magnetic...
from 18,90 €
Taglierino per acrilico Olfa PC-L
from 3,50 €
yellow plastic handle, retractable blade, built-in room in the handle with two spare blades
Taglierino a lama rotante RTY-1/G 28
from 5,90 €
yellow plastic handle, blade protection, round blade ø 28 mm
Taglierino Olfa n° 300 per lame 9 mm.
from 5,90 €
yellow plastic handle, notched feeder, positioning lock screw, blade in metal guide
Hollow punch set
from 14,90 €
Contents of set: 3/4/5/6/7/8/10/11/12 mm
view more articles
This is Modulor
We Love Material
Whether for design, architecture, model making, DIY, artwork or stationery: over 30,000 articles that make the heart beat faster. For professionals. And aspiring professionals.
Inspiring & Unique
Abreast of all developments in the world of materials: At Modulor there are always new, first-class products waiting to be discovered. In all shapes and colours – and in many instances tailor-made.
Esperti creativi per tradizione
Questions about materials? We provide personalized and competent advice. With over 25 years of experience our enthusiasm for materials continues unabated: +49 30 690 360
PayPal, credit cards, direct debit – at Modulor paying is very simple. Pay after delivery? No problem: just select „Invoice“ as payment method.
We deliver with our logistics partner quickly and securely – upon inquiry, same day delivery is even available within the Berlin city limits.
A Berlin Original
All the products and even more ideas can be experienced in person at our Berlin-Kreuzberg store. Over two floors and more than 3,000 m².
Sign Up and Get 5€ Off Your Next Purchase
Exclusive vouchers and sale
All the news about Modulor