Hacia arriba
      Se están encontrando productos ...
      Desgraciadamente la búsqueda de »« no ha tenido resultados.




      Grupo de color



      5 Artículo   /   11 Variedades
      Clasificación: Relevancia
      • Relevancia
      • Topseller
      • Precio creciente
      • Precio decreciente
      • Yeso para modelar
        3 Variedades
        Yeso para modelar
        de 2,20 €
        white, comes in paper sack with foil insert
      • Yeso resina Gedeo
        Yeso resina Gedeo
        de 10,15 €
        extra hard, high-quality alpha plaster, synthetic resin bonded, bright white, fine grained, non-clumping, mixing ratio of powder to water is 3:1; setting time is 8 – 15 minutes, demoulding time is 30 minutes,...
      • Vendas enyesadas
        3 Variedades
        Vendas enyesadas
        de 12,90 €
      • TFC Xyrarock ceramic casting powder, snow white
        3 Variedades
        TFC Xyrarock ceramic casting powder, snow white
        de 21,90 €
        Material: Synthetic, plasticized gypsum-based casting compound, Color: snow white, Mixing ratio: 1:4 (water:casting powder) by weight, Mixing time at 23°C: 30–45 sec.
      • Yeso duro Gedeo
        Yeso duro Gedeo
        de 7,90 €
        a harder and higher quality alpha plaster for artistic castings, course grain, does not clump; mixing ratio of powder to water is 2.5:1, setting time is 8 – 15 minutes, demoulding time is 30 minutes, takes...
      Información sobre Yeso

      Uses: Plaster is not only good for fixing broken bones but is a great material for many creative purposes as well. It can be used in model making or handicrafts either as a natural product (made from burned selenite) or as a recycled material (so-called REA plaster which comes from a flue-gas desulphurizing facility).

      Treatment: Plaster will cure after only a really short working life of a few minutes. In doing so, temperatures of over 50 °C will occur. In liquid form, plaster can be poured into moulds like, for example, ones made of SILICONE RUBBER. Liquid plaster can be coloured by means of PIGMENTS or, subsequent to curing, painted with most commercial paints (including water-based paint).

      Once plaster has solidified, you cannot make it pliable again by adding water because it will never become solid again. By adding cellulose paste (WALLPAPER PASTE) the setting time can be increased somewhat.

      If you want to do additional work on a cured plaster piece you must soak the area with water. The plaster will then be amenable to reworking with the appropriate tool without the piece itself breaking. Once dried, plaster models can be sawn, drilled, filed, cut, sanded, etc. Before subsequently levelling out the surface with more material, the plaster should be made moist because otherwise the second coat will not hold.

      Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information