¿Dónde se puede utilizar el tablero de linóleo?

Ya sea colorido y rústico o monocromo y reservado, ya sea para comedor, oficina en casa, oficina o sala de conferencias. Un tablero de linóleo es el tablero perfecto. El linóleo tiene un tacto agradable. Es firme y elástico, por lo que no es de extrañar que los escritores y dibujantes aprecien el material como superficie de trabajo.

Debido a su efecto antibacteriano, el tablero de linóleo también es adecuado para la cocina y el comedor. El material es difícil de inflamar normalmente (clase C-fl). Se puede colocar una taza de café caliente sobre la superficie de la mesa de linóleo sin remordimientos, ya que es resistente al calor durante un corto periodo de tiempo (hasta 70°C). En entornos técnicos como salas de servidores o salas de producción, el linóleo protege contra la carga electrostática.

El tablero de linóleo, por otra parte, no es apto para su uso en baños, sótanos húmedos y otras habitaciones con alta humedad. Otro problema es la carga puntual del linóleo. La punta del bolígrafo u otros objetos puntiagudos no deben presionarse con demasiada firmeza contra el tablero de linóleo. Existe el riesgo de que la superficie se dañe. Si desea colocar plantas y macetas en su mesa de linóleo, le aconsejamos que utilice posavasos adecuados. La terracota, la arcilla y el metal (óxido) pueden decolorar el linóleo.

¿Para qué sirve la placa de varilla con canto?

Material: aglomerado de abeto con bordes de madera auténtica o de plástico ABS
Dimensiones máximas: 320 x 180 cm
espesor incl. linóleo: 30 mm
Adecuado para

• todos los bastidores de mesa de la serie Modulor (E2, M, T, Y)
• escritorios, mesas de dibujo, mesas de trabajo, mesas de oficina, mesas de comedor, mesas de
• cocina, mesas de conferencia
• combinaciones discretas o valientes combinaciones de linóleo-borde-borde-borde-borde
• mesas grandes (gracias al tratamiento del material y al espesor de la chapa de 30 mm)

What is the Multiplex Birch table top suitable for?

Material: Ground Multiplex Birch with a straight or beveled edge (25° bevel)
Maximum dimensions: 250 x 125 cm
Thickness incl. Linoleum: 20 mm or 26 mm
Suitable for

• all Modulor series table frames (E2, M, T, Y)
• table frames with supporting substructure or top reinforcements when choosing 20 mm top thickness
• desks, drawing tables, work tables, office tables, dining tables, kitchen tables, conference tables
• a natural, light and delicate appearance (beveled edge)
• large format tables (26 mm thick) and smaller tables (20 mm thick)

What is the Multiplex Birch table top suitable for?

Material: Ground Valchromat MDF with a straight or beveled edge (25° bevel)
Maximum dimensions: 250 x 180 cm
Thickness incl. Linoleum: 21 mm
Suitable for

• all Modulor series table frames (E2, M, T, Y) with supporting substructure or top reinforcements, so that the table top does not deform or sag
• desks, drawing tables, work tables, office tables, dining tables, kitchen tables, conference tables
• a natural, light and delicate appearance (beveled edge)
• small to medium-sized tables

Making a desktop: Industrial production + handicraft = linoleum table top

The production process of linoleum table tops combines the advantages and reliability of industrial production with the quality-conscious approach and skills of the craftsman. Unlike our melamine table tops, the core of a linoleum table top can consist of three different materials: A laminboard made of fir wood, a Multiplex board made of birch wood, or a Valchromat MDF board.

The linoleum is cut to size by hand. Since linoleum is a natural material wound on rolls, it is examined very carefully for inclusions and defects before being pressed. Only flawless linoleum pieces are further processed and pressed with the carrier plate. In order for the linoleum table top to remain dimensionally stable, a backing on the underside of the top is always required during lamination. At the turn of the linoleum table top is a brown-violet paper with a similar response to that of linoleum. It ensures that the plate does not warp. The icing on the cake is the regrinding of the linoleum edge with a hand tool. This creates a skillful and beautiful finish.

Depending on the core material, the processes involved in the production of a linoleum table top vary slightly. The Multiplex Birch board and the Valchromat MDF board are only roughly cut before the linoleum is applied. The CNC milling machine provides each linoleum table top with the desired edge formation and the preferred corner radius. Post-processing and repairs are carried out manually.

In the production of the laminboard with edge veneer, the top material is first cut precisely. The edge is approached, and then the linoleum is applied, and the edge is finished by hand. Because the linoleum is glued to the edge and remains visible from the side, it is also referred to as a single edge veneer.

Cleaning the linoleum table top: How to care for your desktop properly

The type and frequency of care and cleaning of a linoleum table top depend on the use of the table top and the degree of dirt. As a rule, it is recommended that spilled drinks, sauces, ice, or the like are immediately absorbed with a soft cloth so that they do not have time to penetrate the material. Regardless of stains and dirt, we recommend that the linoleum table top is carefully maintained. The material is quickly over-treated, and oily products, in particular, can clog it up and leave shiny spots. From our experience with linoleum table tops, we know that oily care products and incorrect use can reduce the elasticity of the material. Therefore, we recommend, for example, to apply corresponding products to the material with a cloth and to smear them quickly.

If the table top is dusty, or if there are crumbs or other loose dirt particles lying on it, this can be easily removed with an ordinary dust cloth.

In cases where dirt has already settled on the linoleum surface, we recommend a cleaning agent especially for linoleum table tops (e.g., Harell linoleum cleaner). Since linoleum is sensitive to lye, a cleaning agent without aggressive lyes should be chosen. With a lint-free cloth and the cleaning agent dissolved in a little water, the dirt can be wiped off the linoleum table top. In case of stubborn dirt, the cleaning agent should be used undiluted and the cleaned surface wiped with a cloth soaked in water.

We do not recommend disinfectants that are not specifically suitable for linoleum. They can discolor the material and leave non-detachable stains. Solvent-containing products, such as the alleged emergency nail polish remover, attack the surface of the linoleum tabletop and also leave irreversible marks.

Never fear the yellow tint

Linoleum is a natural material. Particularly with linoleum table tops in bright colors, post-oxidation can become noticeable and form a so-called drying chamber film. It manifests itself in a soft yellow tint that is harmless and disappears under UV light. When the linoleum table top is used as a desk or work table, the drying chamber film forms where computers, printers, or the like are located. As soon as the equipment and office utensils are removed, and the surface gets access to the sunlight, the original color of the linoleum also returns. The yellow tint cannot be removed by cleaning.

* Valid for shipping within Germany. Learn more about our delivery conditions.