medium pore insulating board from extruded polystyrene rigid foam board, pressure-resistant, smooth, semi-gloss surfaces, straight edges, approx. 33 kg/m³, certified to EN 13501-1 norm, conforms to DIN 4102 building...
Styrofoam azul claro, no recortado
from 2,40 €
air curing, hand-formable rubber based on the silicone elastomer Formerol, self-adhering, after curing is permanently flexible (Shore A -hardness is 70 Sh), the colours can be mixed among themselves, odourless,...
Goma de silicona Sugru, autotemplante
from 8,50 €
transparent, colourless, glossy
Barra redonda de vidrio acrílico XT, incolora
from 1,40 €
card: 2,5 x 55 x 85 mm
Formcard meltable bio-plastic
from 6,90 €
fine pore model building board from extruded polystyrene rigid foam board, extremely pressure-resistant (high density), rough surfaces (not sheared), straight edges, approx. 33 kg/m³, certified to DIN EN 13501-1:...
Espuma rígida poliestireno, blanca, no recortada
from 14,80 €
white granules, pearl-sized (about 3 mm), polyutethane elastome, melting point ca. 60 °C, specific weight 1,2 g/cm²; hazardous warning: none
Granulado termoplástico de modelar Modulor
from 3,60 €
medium pore insulating block made out of extruded polystyrene rigid foam; pressure-resistant, smooth, semi-gloss surface; straight edges, approx. 35 kg/m³, certified as conforming to EN 13501-1, conforms DIN 4102...
Espuma rígida poliestireno, marfil, no recortada
from 3,35 €
cellulose-polyester composite, light brown and opaque, th = 1 mm, ca. 1100 g/m², can be thermoplasically shaped any number of times, one side is coated with a thermoplastic adhesive (smooth, semi-matte surface)...
Worbla´s Finest Art modeling material sheet
from 5,00 €
fine pored modelling panel made of extruded polystyrene rigid foam, very compression resistant (high density), glossy surfaces (untrimmed), straight edges, approx. 34 kg/m³, certified per DIN EN 13501-1; Euroclass...
Espuma rígida poliest., gris-plateada, no recort.
from 8,50 €
matte finish on one side
from 2,95 €
transparent, flourescent, glossy
Barra redonda de vidrio acrílico XT, fluorescente
from 2,60 €
„handicraft plasticine“, comes in foil package
Plastilina estándar, de color
from 3,60 €
2 component quick casting resin, without fillers, hard (approx. 70 Sh.D), highly impact-resistant, very low viscosity (pours extremely well), a substantial amount of fillers can be added, odorless, cures to an opaque...
Resina rápida de PUR para colada G27
from 20,50 €
air-dried, comes in air-tight PE foil
Masilla de modelar Keramiplast
from 5,50 €
Barra redonda de aluminio
from 0,75 €
high quality casting powder, mixing ratio of powder to water is 4:1, working life: 8-10 minutes, curing time: approx. 30 min., expansion: 0.3%, surface hardness (cured): >300 N/mm², 1000 g powder result in 600 ml...
Yeso de colada cerámico Artestone
from 8,30 €
two component water-based acrylic resin system for casting, laminating and coating, for interior as well as protected exterior spaces, hard (81-83 Sh-D hardness), impact resistant, odourless, material is opaque white...
Resina acrílica Acrystal Prima, colada/laminado
from 26,60 €
multi-purpose insulation panel made of expanded polystyrene rigid foam, compression resistant (compressive stress ≥ 100 kPa per DIN EN 826), smooth edges without rim, fine pearl texture, white, approx. 16...
Styropor EPS 040 DEO/WAB
from 0,95 €
extremely fine pored polyurethane-based light moulding material, orange, density: 450 kg/m³; compressive strength: 10 MPa (at 10% compression set, ISO 604), flexural strength: 12 MPa (ISO 178), modulus of...
Plancha de PUR para modelos SikaBlock M450
from 6,30 €
addition-crosslinked precison silicone rubber mould material, medium soft (26 - 28 Sh-A), highly elastic, good mechanical stability, low viscosity (pours well), cures to an opaque light blue colour, mixing ratio of...
Alpa Sil EH 10:1
from 10,50 €
glossy/glossy, both sides with protective film
Bloques de vidrio acrílico GS, transp., incoloros
from 6,50 €
2 component quick casting resin, without fillers, hard (approx. 70 Sh.D), highly impact-resistant, very low viscosity (pours very well), a substantial amount of fillers can be added, cures to an opaque beige-brown...
Resina rápida de PUR para colada G26
from 21,50 €
oven-curing modelling compound (15 min. at 130 °C), very pliable, very crack resistant
from 13,80 €
highly pigmented, intense pigment pastes that can be mixed together for colouring polyurethane, polyester and epoxy resins, is either capable of flowing or a paste depending on the colour, density at room temperature...
Tintes para resinas sintéticas
from 4,80 €
microcellular polyurethane-based modeling material
58 Sh-D, very hard (ISO 868)
600 kg/m³ (ISO 845)
SikaBlock PUR M600 modeling board
from 6,70 €
white, comes in paper sack with foil insert
Yeso para modelar
from 2,00 €
for applying glue in the form of dots (especially Ruderer plastic glue)
Jeringas y cánulas dosificadoras
from 0,20 €
air-drying, one-component water-based stiffener
Endurecedor para tela Pretex
from 17,70 €
fine-pored polyurethane-based rigid foam for model making, bright yellow, density: 80 kg/m³; compressive strength: 0.75 MPa (ISO 604), flexural strength: 1.2 MPa (ISO 178), modulus of elasticity: 24 MPa (ISO...
Espuma rígida de PUR para modelos SikaBlock M80
from 14,50 €
non-drying modelling clay made from wax, fillers and pigments, can be worked with from 15 C° to 25 °C, tear-proof, polishes up well, odorless, homogenized (no air bubbles), forms hard surface and stable edges,...
Arcilla Mars Clay estándar, marrón
from 22,30 €
non-drying modelling clay made from binding agents (microwax among others), fillers (zinc stearate, magnesium and micro hollow globules among others) and dyes; can be worked with from 15 °C to 25 °C, absolutely...
Arcilla TecClay ligera, marrón clara
from 15,10 €
2 component casting resin from unsaturated ortophtal acid and polyester resin and MEKP hardener, preaccelerated, medium reactivity, styrene content is 35%, without fillers, hard, very low viscosity (pours well), when...
Resina de poliéster para colada GTS, cristalina
from 19,90 €
oven-curing modelling compound (15 min. at 130 °C), very pliable, very crack resistant, miscible
Super Sculpey Living Doll
from 14,80 €
2 component casting resin from unsaturated ortophtal acid polyester resin and MEKP hardener, preaccelerated, medium reactivity, styrene content is 35%, without fillers, hard, very low viscosity (pours well), when...