Hacia arriba
Categorías
Buscar
      Categorías
      Productos
      Se están encontrando productos ...
      Desgraciadamente la búsqueda de »« no ha tenido resultados.

      Herramientas portátiles

      Aplicación

      Marca

      Precio

      45 Artículo   /   72 Variedades
      Vista
      Clasificación: Relevancia
      • Relevancia
      • Topseller
      • Precio creciente
      • Precio decreciente
      • Interruptor de pie Proxxon FS
         
        Interruptor de pie Proxxon FS
        de 16,90 €
        fibreglass reinforced nylon housing, with 2.5 m long connecting cable and 50 cm long output cable
      • Juego de brocas en espiral Proxxon, de HSS
        2 Variedades
        Juego de brocas en espiral Proxxon, de HSS
        de 5,20 €
        HSS (per DIN 338) twist drill, short, cylindrical, right-side cutter
      • Steinel hot air tool HL 1620 S
         
        Steinel hot air tool HL 1620 S
        de 45,00 €
        Output: 1600 watt, Voltage: 230 volt, Temperature adjustable at 2 levels: 300, 500 °C, Air volume: 240, 500 l/min
      • Termocortadora Proxxon Thermocut 12/E
         
        Termocortadora Proxxon Thermocut 12/E
        de 39,90 €
        plastic housing, pivotable and extendable wire fixing element, infinitely variable cutting temperature, power cord is 0.5 m Output: 60 W Voltage: 12 V Working temperature: adjustable from about 150 °C –...
      • Discos de corte Proxxon, de acero elástico
         
        Discos de corte Proxxon, de acero elástico
        de 3,90 €
        with tool carrier shaft ø 2.35 mm, given dimensions: ø x thickness
      • Fresa Proxxon, de metal duro
        4 Variedades
        Fresa Proxxon, de metal duro
        de 8,10 €
        wear-resistant, highly concentrated fine grit cutting alloy, various shapes, shaft ø 2.35 or 3.0 mm
      • Steinel HL 1920 E heat gun
         
        Steinel HL 1920 E heat gun
        de 72,10 €
        Output: 2000 Watt, Voltage: 230 Volt, Temperature adjustable at 9 levels: 80 - 600 °C, Air volume set at three different levels: 150, 300, 500 l/Min
      • Discos separadores Proxxon, de corindón
        3 Variedades
        Discos separadores Proxxon, de corindón
        de 2,80 €
        manufactured with a special bonding agent, with tool carrier shaft ø 2.35 mm (except Proxxon No. 28812), given dimensions: ø x thickness
      • Cepillos de lijar Proxxon, de vellón de nylon
         
        Cepillos de lijar Proxxon, de vellón de nylon
        de 4,55 €
        different shapes and sizes (see picture), shaft ø 2.35 mm
      • Discos separadores Proxxon, diamantados
        2 Variedades
        Discos separadores Proxxon, diamantados
        de 9,50 €
        with tool carrier shaft ø 2.35 mm, given dimensions: ø x thickness
      • Portabrocas de tres garras Proxxon
         
        Portabrocas de tres garras Proxxon
        de 5,40 €
        for all handheld MICROMOT machines (excluding the engraver GG 12, professional drill/grinder IB/E, long neck straight drill/grinder LB/E, drilling machine COLT 2 and flexishaft 110/P).
      • Discos pulidores Proxxon
        2 Variedades
        Discos pulidores Proxxon
        de 3,00 €
        various versions made of cotton, chamois and felt; shaft diameter is 2.35 mm
      • Conjunto Proxxon para modelistas y grabadores
         
        Conjunto Proxxon para modelistas y grabadores
        de 77,90 €
        Proxxon milling/drilling machine Micromot 50/E, basic transformer with 1 socket for Micromot plug, includes 34 bits and cutters of industrial or dental quality and 6 steel collet chucks (ø 1.0/1.5/2.0/2.4/3.0 and...
      • Taladradora/lijadora precisión Proxxon FBS 240/E
         
        Taladradora/lijadora precisión Proxxon FBS 240/E
        de 67,60 €
        sturdy fibreglass-reinforced polyamide housing with comfort sections in the grip area and a 20 mm collar that fits to the Micromot system components, spindle runs in precision ball bearing and is fitted with a lock...
      • Hojas, bandas y punteras Proxxon para lijar
        5 Variedades
        Hojas, bandas y punteras Proxxon para lijar
        de 3,30 €
        made from normal corundum, various grits, shapes and sizes (see picture), with tool carrier shaft ø 3.0 mm (except Proxxon No. 28983, 28981, 28989)
      • Boquillas para pistolas de aire caliente Steinel
        2 Variedades
        Boquillas para pistolas de aire caliente Steinel
        de 7,60 €
        stainless steel
      • Hojas para sierras calar Proxxon STS 230/E-STS12/E
        2 Variedades
        Hojas para sierras calar Proxxon STS 230/E-STS12/E
        de 3,90 €
      • Ruedas de fieltro Proxxon
         
        Ruedas de fieltro Proxxon
        de 3,50 €
        with tool carrier shaft ø 2.35 mm, given dimensions: ø x thickness
      • Tornillo portapiezas para máquinas Proxxon MS 4
         
        Tornillo portapiezas para máquinas Proxxon MS 4
        de 14,90 €
        die-cast zinc, three milled supporting surfaces, with slot that fits the adjustable fence of the bench drill TBM and the drill stand MB 140/S, horizontal and vertical V-slots in the jaw for round materials, jaw width...
      • Conjunto completo para pulido Proxxon, 10 piezas
         
        Conjunto completo para pulido Proxxon, 10 piezas
        de 13,50 €
        see picture, shaft diameter 2.35 mm
      • Discos separadores Proxxon, de óxido de aluminio
        2 Variedades
        Discos separadores Proxxon, de óxido de aluminio
        de 4,20 €
        woven fabric bond, with tool carrier shaft ø 2.35 mm (except Proxxon No. 28809), given dimensions: ø x thickness
      • Pinzas portaherramientas de acero Proxxon Micromot
         
        Pinzas portaherramientas de acero Proxxon Micromot
        de 8,75 €
        made from hardened steel, for all Micromot handheld machines (except engraving machine GG 12), with locking nut and collet holder
      • Abanico de lijar Proxxon, de corindón normal
        2 Variedades
        Abanico de lijar Proxxon, de corindón normal
        de 2,60 €
        various sizes (see picture), shaft ø 3.0 mm, given dimensions: ø x height
      • Soportes de repuesto Proxxon
         
        Soportes de repuesto Proxxon
        de 4,30 €
        l = 44 mm
      • Broca espiral Proxxon, de acero tungsteno-vanadio
        5 Variedades
        Broca espiral Proxxon, de acero tungsteno-vanadio
        de 3,95 €
        purpose-made and selected wolfram vanadium steel, shafts and drill tips manufactured from one-piece blanks, shaft ø 2.35 mm, l (total) = 44 mm
      • Fuente de alimentación Proxxon Micromot NG 2/E
         
        Fuente de alimentación Proxxon Micromot NG 2/E
        de 31,90 €
        compact housing made from Noryl (especially heat-resistant as is essential for transformers), thyristor electronic speed control (with feedback), overload protection (Positive Temperature Coefficient resistance), 1...
      • Broca-fresa Proxxon, de metal duro
         
        Broca-fresa Proxxon, de metal duro
        de 9,00 €
        milling drills (called "spear" drills in German), wear-resistant cutting alloy, shaft ø 2.35 mm, l (total) = 30 mm
      • Soporte de taladro Micromot MB 140/S
         
        Soporte de taladro Micromot MB 140/S
        de 51,90 €
        surface milled table 120 x 220 mm, machined feeds and fittings, headstock is of die-cast aluminium (throat capacity 140 mm), chromed steel column (280 x 20 mm), depth stop, chromed feed lever with return spring,...
      • Discos abrasivos Proxxon, de carburo de silicio
         
        Discos abrasivos Proxxon, de carburo de silicio
        de 4,20 €
        with tool carrier shaft ø 2.35 mm, given dimensions: ø x thickness
      • Pulidores elásticos Proxxon
         
        Pulidores elásticos Proxxon
        de 5,65 €
        various shapes and sizes (see picture), shaft ø 2.35 mm, given dimensions: ø x height or thickness
      • Cepillos de latón Proxxon
         
        Cepillos de latón Proxxon
        de 7,30 €
        various constructions with brush, cup and wheel shapes, shaft ø 2.35 mm
      • Tornillo de banco de precisión Proxxon FMZ
         
        Tornillo de banco de precisión Proxxon FMZ
        de 30,90 €
        with die-cast zinc clamp for worktops up to 60 mm thick, ball joint (rotates and swings in all directions), 75 mm jaws with rubber covering for sensitive work pieces, weighs 1.6 kg
      • Muelas Proxxon, de corindón refinado
        2 Variedades
        Muelas Proxxon, de corindón refinado
        de 1,80 €
        various shapes and sizes (see picture), shaft ø 2.35 or 3.0 mm
      • Fresas Proxxon, de acero tungsteno-vanadio
        6 Variedades
        Fresas Proxxon, de acero tungsteno-vanadio
        de 5,10 €
        purpose-made and selected wolfram vanadium steel, shafts and milling tips manufactured from one-piece blanks, various shapes (see picture), shaft ø 2.35 mm or 3.0 mm (see picture again)
      • Sierra de calar Proxxon Super STS 230/E
         
        Sierra de calar Proxxon Super STS 230/E
        de 99,00 €
        sturdy fibreglass-reinforced polyamide housing, stable head of die-cast aluminium, reduction gear and additional stroke speed regulator (full wave electronic speed control), foot is adjustable for up to 45° mitre...
      • Sierra de calar Proxxon STS 12/E
         
        Sierra de calar Proxxon STS 12/E
        de 49,00 €
        sturdy fibreglass reinforced polyamide housing, powerful 12 to 18 V motor, includes two saw blades (course and fine) distribution voltage (power supply): 12 - 18 V stroke: 6 mm strokes per minute: controlled from...
      Información sobre Herramientas portátiles

      Proxxon Hand-held Tools

      The Proxxon company is a leading manufacturer of high quality hand-held and table top tools. Proxxon tools were not made to be put in drawers. They are made in such a way that the user will enjoy working with them over a long period of time. They are quiet and vibration-free. When used properly, Proxxon tools have an unusually long service life for an electric tool.

      Our product assortment contains a selection of machines from Proxxon comprehensive product line. We can, however, provide any Proxxon tools to our customers within a very short time span. If you are interested in any other Proxxon product please acquire a Proxxon catalogue or get the necessary information from the excellently made website www.proxxon.com.

      Our own experience has shown that the Proxxon repair and replacement part service functions wonderfully. Such commitment to service is another attribute distinguishing a leading market manufacturer from cheap suppliers! If, despite the high quality workmanship, some defect should arise, Proxxon will not leave you holding the bag. The staff at the Proxxon service centre reacts quickly and reliably.

      Practically every operating manual includes an exploded drawing of the tool or device. This helps the customer to identify and order the necessary replacement parts – it should be noted, though, that it is sometimes only possible to order pre-assembled sub-assemblies. From Germany you should contact Proxxon at:

      Proxxon Zentralservice
      D 54518 Niersbach
      Tel. 06575/78-125
      Fax 06575/78-101
      E-Mail: technik@proxxon.com

      In many countries Proxxon has partner businesses which are capable of performing repairs and delivering replacement parts – please note the related information found on the website www.proxxon.com. When making a return within the time limit of the guarantee, please do not forget to include your receipt.

      Esto es Modulor
      Modulor Newsletter
      Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information