Scorri verso l'alto
Categorie
Ricercare
      Categorie
      Prodotti
      Sto cercando i prodotti...
      La ricerca di »« non ha prodotto risultati.

      Lamiere di acciaio

      Materiale

      Applicazione

      Gruppo colore

      Prezzo

      4 Articolo   /   12 Varianti
      vista
      Classificazione: Rilevanza
      • Rilevanza
      • Topseller
      • Prezzo crescente
      • Prezzo decrescente
      • Steel, thin sheet, raw, custom cutting
        2 Varianti
        Steel, thin sheet, raw, custom cutting
        da 17,80 €
        St 1203, cold rolled, smooth
      • Steel thin sheet, galvanised custom cutting
        2 Varianti
        Steel thin sheet, galvanised custom cutting
        da 23,50 €
        Processing: hot-dip galvanized, cold roled, Surface: smooth
      • Lamiera sottile di acciaio, grezza
        4 Varianti
        Lamiera sottile di acciaio, grezza
        da 2,30 €
        St 1203, cold rolled, smooth
      • Lamiera sottile di acciaio, zincata
        4 Varianti
        Lamiera sottile di acciaio, zincata
        da 2,40 €
        hot-dip galvanised, cold rolled, smooth
      Informazioni su Lamiere di acciaio

      Raw steel will rust very easily and can produce very interesting surfaces as a result. It will rust even faster when the thin coat of grease from the production process is removed by, for example, grain alcohol. Great looking effects can be produced on its surface by means of chemical baths or use of an oven. Sheet steel is galvanised so as to prevent rust forming on it. Along its cut edges the raw steel is not galvanised and this area will therefore tend to rust.

      Cutting work on sheet steel with a thickness of up to 1 mm can be done with a METAL SNIPS; thicker sheets must be cut with either electric or hydraulic tools. Raw sheet steel can be welded or brazed. Galvanised sheet steel is difficult to braze and doesn’t take well to welding either.

      Gluing work can be done with two component adhesives like, for example, those based on EPOXY or CYANOACRYLATE. In model making, both RUDERER plastic glue and UHU HARD can also be used.

      Questa è Modulor
      Modulor Newsletter
      Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information