to top
Search
      Categories
      Products
      searching for products ...
      There is no result for »«.
      Extended until 05.04.2020: Up to 25%25% discount on furniture for working at home.
      Set up now

      Model and Mould Making

      Material

      Application

      Brand

      Price

      223 Article(s)   /   885 Variants
      View
      Sort by: Relevance
      • Relevance
      • Topseller
      • Price - lowest first
      • Price - highest first
      • Varaform gauze
        2 Variants
        Varaform gauze
        from 15,80 €
        Product description: translucent, closed surface coated cotton mesh, 18% cotton, 82% thermoplastic synthetic resin, heating time: 1-2 min, processing time: 2-3 min
      • Railing strips, metal, nickel-plated
        3 Variants
        Railing strips, metal, nickel-plated
        from 7,40 €
        brass, nickel-plated, silver, glossy, l = 250 mm
      • PUR casting/moulding resin U1404
        5 Variants
        PUR casting/moulding resin U1404
        from 32,90 €
        material: 2 component casting resin, End state: material is reddish and transparent when cured, Working life: 25 to 100 minutes, Density: (at room temperature) approx. 1.05 g/cm³
      • Super Sculpey Living Doll
        3 Variants
        Super Sculpey Living Doll
        from 14,90 €
        product: oven-curing modelling compound (15 min. at 130 °C)
      • Modelling plaster
        3 Variants
        Modelling plaster
        from 2,30 €
        white, comes in paper sack with foil insert
      • Bristle trees out of coconut fibre
        6 Variants
        Bristle trees out of coconut fibre
        from 1,60 €
        wound wire with coconut fibre bristles, trimmed, black stem
      • Polystyrene vehicles, white, 1:100, car
         
        Polystyrene vehicles, white, 1:100, car
        from 8,60 €
        injection moulding
      • Bicycles, polystyrene, white
        3 Variants
        Bicycles, polystyrene, white
        from 0,80 €
        injection moulding
      • Biothan/Biodur 1785/330 casting resin, hard
        2 Variants
        Biothan/Biodur 1785/330 casting resin, hard
        from 26,90 €
        Material: two-component polyurethane casting resin, Colour: colourless transparent when cured, Shore hardness: soft (ca. Sh-A 40 - 70), Mixing ratio: resin to hardener ca. 1.5-2.5 to 1
      • Hermoli detail model figures, unpainted, white, 1:25
        3 Variants
        Hermoli detail model figures, unpainted, white, 1:25
        from 12,90 €
        Material: Polystyrene, Scale: 1:25, Color: Unpainted, white, Contents: 6 pieces (standing), 4 pieces (sitting), or 4 x 6 pieces (standing)
      • TecClay, lightweight, light brown
         
        TecClay, lightweight, light brown
        from 18,90 €
        product: non-drying modelling clay, material: with binding agents (microwax among others), fillers (zinc stearate, magnesium and micro hollow globules among others) and dyes
      • Papier-mâché modelling pulp
         
        Papier-mâché modelling pulp
        from 2,40 €
        cellulose pulp, air-dried, comes in plastic bag
      • Etched brass silhouette figures
        2 Variants
        Etched brass silhouette figures
        from 15,10 €
        th = 0.2 mm, sheet format, 45 x 305 mm
      • Stainless steel silhouette figures, 1:500
         
        Stainless steel silhouette figures, 1:500
        from 4,50 €
        punched out, matte finished, individuals and pairs, standing, walking, running, sitting, in groups, Corbusiers modulor proportion figure (the guy with one arm raised), figure with baby carriage, bicycle and...
      • Stainless steel silhouette figures, 1:200
         
        Stainless steel silhouette figures, 1:200
        from 4,50 €
        punched out, matte finished, individuals and pairs, standing, walking, running, sitting, in groups, Corbusier´s modulor proportion figure (the guy with one arm raised), football player, person with dog, bicycle and...
      • Fimo Professional modeling clay 8004
        24 Variants
        Fimo Professional modeling clay 8004
        from 3,40 €
        Baking time and temperature: 30 minutes at 110°C, Packaging: reclosable foil packaging, Weight: 85 grams
      • Acrylic silhouette figures, laser cut, 1:500
        5 Variants
        Acrylic silhouette figures, laser cut, 1:500
        from 5,50 €
        cast precision acrylic, transparent, glossy, single and paired figures (units), standing and walking, small acrylic plate 0.5 x 30 x 90 mm with separate units that can be pressed out
      • Latex Moulding Material
        3 Variants
        Latex Moulding Material
        from 10,90 €
        natural rubber-based air drying single component casting material (dispersion), pre-vulcanized with ammonia (0.3%), very soft (no Sh-A data available), extremely elastic, very low viscosity, cures to a translucent...
      • NT C 1500 P circle cutter
         
        NT C 1500 P circle cutter
        from 29,90 €
        white plastic with metal workings, includes protective cap for the blade and a guide line template
      • Stoff-Steif fabric stiffener
        2 Variants
        Stoff-Steif fabric stiffener
        from 13,90 €
        Material: Hardener based on a pollutant-free vinyl ester/acrylic co-polymer, Color: colorless transparent, pH-value: 3.8, Consumption: 1200 to 2500 g/m² (depending on textile)
      • TFC silicone rubber type 15 translucent set
        4 Variants
        TFC silicone rubber type 15 translucent set
        from 27,90 €
        Material: Addition-curing 2 component silicone rubber, Shore hardness: A 32, Color: colorless, Mixing ratio: 1:1 by weight
      • TFC PU casting resin set
        4 Variants
        TFC PU casting resin set
        from 23,90 €
        Material: 2-component casting resin, Shore hardness: D 75, Color: white/beige (component A) and beige (component B), Mixing ratio: 1:1 by weight
      • Fencing, polystyrene, white, horizontal
        3 Variants
        Fencing, polystyrene, white, horizontal
        from 4,00 €
        horizontal partitions, injection moulding, l = 170 mm
      • Chairs, white, 1:50
        4 Variants
        Chairs, white, 1:50
        from 0,90 €
        polystyrene, injection moulding
      • Worbla's Transpa Art modelling sheets
        5 Variants
        Worbla's Transpa Art modelling sheets
        from 5,00 €
        Product description: thermoplastic polyester, Colour: colourless, transparent, Thickness: ca. 0,8 mm, Density: ca. 1000 g/m²
      • TFC silicone rubber type 12 durable, set
        4 Variants
        TFC silicone rubber type 12 durable, set
        from 35,90 €
        Material: Addition-curing 2 component silicone rubber, Shore hardness: A 30, Color: white, Mixing ratio: 1:1 by weight
      • Lattice girder ABS, white
        8 Variants
        Lattice girder ABS, white
        from 10,90 €
        injection moulding
      • Noch static grass, green
        4 Variants
        Noch static grass, green
        from 3,00 €
        fine
      • Gedeo modeling clay
        2 Variants
        Gedeo modeling clay
        from 7,50 €
        air-drying, has synthetic binders, does not crack as it dries, curing time is 4 to 5 days (can be shortened by use of a microwave over), after opening must be stored in moist cloth and enclosed in a tightly closed...
      • Formenbau pouring box frame, adjustable, set
        2 Variants
        Formenbau pouring box frame, adjustable, set
        from 20,90 €
        Material: Aluminium, Aluminium folded sheet: 4 pieces, each 100 mm x 200 mm x 50 mm, Aluminium base plate: 1 piece at 200 mm x 200 mm
      • Etched brass fencing
        7 Variants
        Etched brass fencing
        from 14,20 €
        th = 0,2 mm, sheet format, 45 x 305 mm
      • Heki fleece foliage, coloured
        9 Variants
        Heki fleece foliage, coloured
        from 9,40 €
        synthetic fibre fleece, flocked with fine foam flock (ø 1 - 2 mm)
      • Biothan / Biodur 1770/330 casting resin, soft
        2 Variants
        Biothan / Biodur 1770/330 casting resin, soft
        from 44,90 €
        Material: two-component polyurethane casting resin, Colour: colourless transparent when cured, Shore hardness: soft (ca. Sh-A 40 - 70), Mixing ratio: resin to hardener ca. 1.5-2.5 to 1
      • Humbrol model paint, matte
        77 Variants
        Humbrol model paint, matte
        from 2,00 €
        enamel paint, smudge-proof, weather-resistant, saliva resistant
      • TFC Xyrarock ceramic casting powder, snow white
        3 Variants
        TFC Xyrarock ceramic casting powder, snow white
        from 19,90 €
        Material: Synthetic, plasticized gypsum-based casting compound, Color: snow white, Mixing ratio: 1:4 (water:casting powder) by weight, Mixing time at 23°C: 30–45 sec.
      • Elastic surfacer (filler), white cream
        2 Variants
        Elastic surfacer (filler), white cream
        from 5,90 €
        ready-to-use filler for interior use, drying time is 2-3 hours
      Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information
      Welcome to Modulor
      WITH or WITHOUT VAT?
      As a business customer, see net prices - or as an individual customer, see all prices including sales tax.
      Business customer
      Price with sales tax
      Private customer
      with VAT