Scorri verso l'alto
Categorie
Ricercare
      Categorie
      Prodotti
      Sto cercando i prodotti...
      La ricerca di »« non ha prodotto risultati.

      Lastre di metallo

      Materiale

      Applicazione

      Gruppo colore

      Marchio

      Prezzo

      45 Articolo   /   113 Varianti
      vista
      Classificazione: Rilevanza
      • Rilevanza
      • Topseller
      • Prezzo crescente
      • Prezzo decrescente
      • Lamiere d'alluminio
        10 Varianti
        Lamiere d'alluminio
        da 2,80 €
        medium hard, smooth, one side with protective film
      • Lamiere d'ottone
        6 Varianti
        Lamiere d'ottone
        da 3,00 €
        medium hard, one side with protective film (starting at thicknesses of 0.3 mm)
      • Lamiere di rame
        6 Varianti
        Lamiere di rame
        da 4,00 €
        medium hard, smooth, one side with protective film (starting at thicknesses of 0.5 mm)
      • Aluminium hammered sheets, coarse custom cutting
         
        Aluminium hammered sheets, coarse custom cutting
        da 59,00 €
        Al 99.5; medium hard, through-stamped
      • Lamiera di latta, stagnata
        4 Varianti
        Lamiera di latta, stagnata
        da 2,20 €
        tin-plated in silver, smooth
      • Striscia d'alluminio
        5 Varianti
        Striscia d'alluminio
        da 5,00 €
        Al 99.5; smooth
      • Aluminium sheets custom cutting
        4 Varianti
        Aluminium sheets custom cutting
        da 29,50 €
        medium hard, smooth, one side with protective film
      • Copper sheets custom cutting
        2 Varianti
        Copper sheets custom cutting
        da 145,00 €
        medium hard, smooth, one side with protective film (starting at thicknesses of 0.5 mm)
      • Brass sheets custom cutting
        3 Varianti
        Brass sheets custom cutting
        da 94,00 €
        Strength: from 0.3 mm
      • Lamiera sottile di acciaio temperato, lucida
        6 Varianti
        Lamiera sottile di acciaio temperato, lucida
        da 4,50 €
        V2A, III d, stainless, one side high gloss, cold rolled, smooth, high gloss side has protective film, low-magnetic
      • Steel thin sheet, galvanised custom cutting
        2 Varianti
        Steel thin sheet, galvanised custom cutting
        da 23,50 €
        Processing: hot-dip galvanized, cold roled, Surface: smooth
      • Strisce pretagliate d'alluminio
        2 Varianti
        Strisce pretagliate d'alluminio
        da 2,50 €
        Al 99.5; hard, smooth
      • Steel, thin sheet, raw, custom cutting
        2 Varianti
        Steel, thin sheet, raw, custom cutting
        da 17,80 €
        St 1203, cold rolled, smooth
      • Lamiera sottile di acciaio temperato, molata
        6 Varianti
        Lamiera sottile di acciaio temperato, molata
        da 6,40 €
        V2A, stainless, one side sanded to a semi-gloss (grit 240), cold rolled, smooth, shaded side has protective film, non-magnetic, textural configuration parallel to the second named measurement (large sheets)
      • Strisce pretagliate di piombo
        2 Varianti
        Strisce pretagliate di piombo
        da 5,80 €
        soft, smooth
      • Strisce pretagliate d'ottone
        2 Varianti
        Strisce pretagliate d'ottone
        da 2,20 €
        CuZn 37, full hard plate, smooth
      • Strisce pretagliate di rame
        3 Varianti
        Strisce pretagliate di rame
        da 4,00 €
        soft, smooth
      • Foglio d'alluminio martellato
        2 Varianti
        Foglio d'alluminio martellato
        da 2,50 €
        Al 99.5; soft, through-stamped
      • Lamiera sottile di acciaio, grezza
        4 Varianti
        Lamiera sottile di acciaio, grezza
        da 2,30 €
        St 1203, cold rolled, smooth
      • Stainless steel thin sheets, ground custom cutting
        2 Varianti
        Stainless steel thin sheets, ground custom cutting
        da 95,00 €
        V2A, stainless, one side sanded to a semi-gloss (grit 240), cold rolled, smooth, polished side has protective film, non-magnetic, textural configuration parallel to the second named measurement (large sheets)
      • Aluminium stucco-patterned sheets custom cutting
         
        Aluminium stucco-patterned sheets custom cutting
        da 51,50 €
        Al 99.5; medium hard, through-stamped
      • Strisce pretagliate d'allumino, colori metallici
        2 Varianti
        Strisce pretagliate d'allumino, colori metallici
        da 1,05 €
        medium hard, smooth, both sides covered with metallic colour
      • Lamiera d' alluminio martellata, grossolana
        2 Varianti
        Lamiera d' alluminio martellata, grossolana
        da 4,00 €
        Al 99.5; medium hard, through-stamped
      • Aluminium fine-corrugated sheets custom cutting
         
        Aluminium fine-corrugated sheets custom cutting
        da 61,00 €
        Al 99.5, medium hard, through-stamped, s(pacing) = 3.0 mm, h = 1.2 mm, textural configuration lengthwise (large sheets)
      • Aluminium chequer plate, Duett W2 custom cutting
         
        Aluminium chequer plate, Duett W2 custom cutting
        da 78,00 €
        AlMg 3, stamped/smooth, length of the chequer pattern = 35 mm
      • Lamiera d'alluminio finemente ondulata
        2 Varianti
        Lamiera d'alluminio finemente ondulata
        da 5,20 €
        Al 99.5, medium hard, through-stamped, s(pacing) = 3.0 mm, h = 1.2 mm, textural configuration lengthwise (large sheets)
      • Striscia d'ottone
         
        Striscia d'ottone
        da 16,90 €
        CuZn 37, full hard plate, smooth
      • Lamiera d'alluminio mediamente ondulata
        2 Varianti
        Lamiera d'alluminio mediamente ondulata
        da 4,70 €
        Al 99.5; medium hard, through-stamped, s(pacing) = 4.5 mm, h = 1.5 mm, textural configuration crosswise (large format)
      • Stainless steel thin sheets, glossy custom cutting
        2 Varianti
        Stainless steel thin sheets, glossy custom cutting
        da 65,00 €
        V2A, III d, stainless, one side high gloss, cold rolled, smooth, high gloss side has protective film, low-magnetic
      • Foglio di alluminio duro
         
        Foglio di alluminio duro
        da 29,40 €
        medium hard, smooth, both sides coated with silver colours
      • Foglio di alluminio Cinefoil, nero
        2 Varianti
        Foglio di alluminio Cinefoil, nero
        da 2,60 €
        matte/semi-gloss, soft, smooth, both sides powder-coated in black
      • Striscia di rame
         
        Striscia di rame
        da 32,80 €
        soft, smooth
      • Lamiera sottile di acciaio, zincata
        4 Varianti
        Lamiera sottile di acciaio, zincata
        da 2,40 €
        hot-dip galvanised, cold rolled, smooth
      • Lamiera d'alluminio con rilievi tipo stucco
        2 Varianti
        Lamiera d'alluminio con rilievi tipo stucco
        da 4,00 €
        Al 99.5; medium hard, through-stamped
      • Aluminium medium-corrugated sheets custom cutting
         
        Aluminium medium-corrugated sheets custom cutting
        da 57,50 €
        Al 99.5; medium hard, through-stamped, s(pacing) = 4.5 mm, h = 1.5 mm, textural configuration crosswise (large format)
      • Aluminium sheets, anodised custom cutting
         
        Aluminium sheets, anodised custom cutting
        da 54,00 €
        AlMg1 E6/EV1 as per construction norm DIN 17611 and EN AW-5005A, both sides smooth, one side with protecitive film
      Questa è Modulor
      Modulor Newsletter
      Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information