Hacia arriba
Categorías
Buscar
      Categorías
      Productos
      Se están encontrando productos ...
      Desgraciadamente la búsqueda de »« no ha tenido resultados.

      Moldes

      Material

      Aplicación

      Grupo de color

      Marca

      Precio

      42 Artículo   /   108 Variedades
      Vista
      Clasificación: Relevancia
      • Relevancia
      • Topseller
      • Precio creciente
      • Precio decreciente
      • Resina cristal Gedeo, transparente
        3 Variedades
        Resina cristal Gedeo, transparente
        de 13,30 €
        product: 2-component epoxy resin casting compound, Contents: 1 pair protective gloves, 2 measuring beakers, 2 stirring spatulas
      • Epoxy casting resin, water clear, set
         
        Epoxy casting resin, water clear, set
        de 42,90 €
        cold-curing, two-component casting resin consisting of bisphenol A-epichlorohydrin and epoxy hardener with polyoxyalkyleneamine, unfilled, hard, very low viscosity (very pourable), cured material is colourless and...
      • Creastone concrete casting compound
        2 Variedades
        Creastone concrete casting compound
        de 6,10 €
        Mixing ratio: 10:1, 100 gram powder : makes 50 ml casting compound, Curing time: 2-3 days, Can be painted: 1-2 days after demoulding
      • Resina rápida de PUR para colada G27
        4 Variedades
        Resina rápida de PUR para colada G27
        de 22,90 €
        material: 2 component quick casting resin, End state: cures to an opaque beige colour, density (at room temperature) approx. 1.1 g/cm³, Working life: approx. 2 minutes (for 200 g)
      • Jeringas y cánulas dosificadoras
        5 Variedades
        Jeringas y cánulas dosificadoras
        de 0,20 €
        for applying glue in the form of dots (especially Ruderer plastic glue)
      • Resina acrílica Acrystal Prima, colada/laminado
        4 Variedades
        Resina acrílica Acrystal Prima, colada/laminado
        de 23,90 €
        material: two component water-based acrylic resin system, Range of application: for casting, laminating and coating, for interior as well as protected exterior spaces
      • Resina de poliéster para colada R&G, cristalina
        2 Variedades
        Resina de poliéster para colada R&G, cristalina
        de 13,55 €
        product: 2 component casting resin from unsaturated ortophtal acid polyester resin and MEKP hardener, Cured material: colourless and transparent, Density (at room temperature): approx. 1.22 g/cm³,
      • Resina rápida de PUR para colada G26
        4 Variedades
        Resina rápida de PUR para colada G26
        de 22,90 €
        material: 2 component quick casting resin, End state: cures to an opaque beige-brown colour, Density: (at room temperature) approx. 1.1 g/cm³
      • Tintes para resinas sintéticas
        7 Variedades
        Tintes para resinas sintéticas
        de 5,30 €
        Product description: highly pigmented, intense pigment pastes that can be mixed together, Use: for colouring polyurethane, polyester and epoxy resins, Storing: shelf-life when properly stored: 12 months
      • Resina de poliéster para colada GTS, cristalina
        2 Variedades
        Resina de poliéster para colada GTS, cristalina
        de 19,90 €
        Contents: 2 component casting resin from unsaturated ortophtal acid and polyester resin and MEKP hardener, includes a mixing bowl for sma ..., End state: when cured is transparent and colourless, density (at room temperature) approx. 1.2 g/cm³
      • Resina de PUR para colada/moldes U1404
        5 Variedades
        Resina de PUR para colada/moldes U1404
        de 29,90 €
        material: 2 component casting resin, End state: material is reddish and transparent when cured, Working life: 25 to 100 minutes, Density: (at room temperature) approx. 1.05 g/cm³
      • Vasos de mezclas, de polietileno
        2 Variedades
        Vasos de mezclas, de polietileno
        de 4,90 €
        polyethylene single-use mixing cups (HDPE), translucent, colourless, opening diameter: 82 mm (250 ml), 106 mm (600 ml), inner walls and bottom are smooth
      • Biothan/Biodur 1785/330 casting resin, hard
        2 Variedades
        Biothan/Biodur 1785/330 casting resin, hard
        de 26,90 €
        Material: two-component polyurethane casting resin, Colour: colourless transparent when cured , Shore hardness: soft (ca. Sh-A 40 - 70), Mixing ratio: resin to hardener ca. 1.5-2.5 to 1
      • Yeso para modelar
        3 Variedades
        Yeso para modelar
        de 2,10 €
        white, comes in paper sack with foil insert
      • Espátula de madera para mezclas
        2 Variedades
        Espátula de madera para mezclas
        de 0,95 €
        l = 150 mm, w = 20 mm, for stirring resin preparations of up to about 500 g
      • Agente desmoldeante, baja viscosidad, soluble agua
         
        Agente desmoldeante, baja viscosidad, soluble agua
        de 4,60 €
        dyed to a reddish colour, polyvinyl alcohol-based; resistant to numerous solvents, styrol and benzene; ready-to-use, apply with cloth or brush, flash-off time: 15-20 minutes
      • Biothan / Biodur 1770/330 casting resin, soft
        2 Variedades
        Biothan / Biodur 1770/330 casting resin, soft
        de 44,90 €
        Material: two-component polyurethane casting resin, Colour: colourless transparent when cured , Shore hardness: soft (ca. Sh-A 40 - 70), Mixing ratio: resin to hardener ca. 1.5-2.5 to 1
      • Gutenberg Wappenlack (Siegellack)
        5 Variedades
        Gutenberg Wappenlack (Siegellack)
        de 3,40 €
        l = 130 mm
      • Resina cristal Gedeo, transparente, de color
        5 Variedades
        Resina cristal Gedeo, transparente, de color
        de 14,60 €
        2-component epoxy resin casting material, transparent, colourless, waterproof and UV resistant, mixing ratio of resin to water is 2:1, curing time: 12 hours for the surface, 24 hours for the core, shelf life when...
      • Mould release wax, emulsion
         
        Mould release wax, emulsion
        de 3,60 €
        flash-off time: 15 - 20 minutes, uses: 50 - 100 g per sq. metre, volume: 60 ml, color: colourless when dried
      • Resina epoxi para colada, cristalina
        2 Variedades
        Resina epoxi para colada, cristalina
        de 33,40 €
        cold-curing, two-component casting resin consisting of bisphenol A-epichlorohydrin and epoxy hardener with polyoxyalkyleneamine, unfilled, hard, very low viscosity (very pourable), cured material is colourless and...
      • TFC PU casting resin set
        4 Variedades
        TFC PU casting resin set
        de 22,90 €
        Material: 2-component casting resin, Shore hardness: D 75, Color: white/beige (component A) and beige (component B), Mixing ratio: 1:1 by weight
      • Polvo de aluminio
        2 Variedades
        Polvo de aluminio
        de 17,90 €
        silver to matte grey, stabilized, grain size is 0 - 0.07 mm, density is 2.7 g/cm³ (powder density is 1.0 g/cm³)
      • TFC Xyrarock ceramic casting powder, snow white
        3 Variedades
        TFC Xyrarock ceramic casting powder, snow white
        de 21,90 €
        Material: Synthetic, plasticized gypsum-based casting compound, Color: snow white, Mixing ratio: 1:4 (water:casting powder) by weight, Mixing time at 23°C: 30–45 sec.
      • Relleno ligero (micro sílice)
        2 Variedades
        Relleno ligero (micro sílice)
        de 4,30 €
        grey, powdery form, grain size is 0.01 - 0.25 mm, density is 0.6 g/cm³, (powder density is 0.4 g/cm³)
      • Alúmina (hidróxido de aluminio)
        2 Variedades
        Alúmina (hidróxido de aluminio)
        de 5,30 €
        white, dust-free, powdery form, grain size is 0 - 0.032 mm, density is 2.4 g/cm³ (powder density is 1.2 g/cm³)
      • Yeso resina Gedeo
         
        Yeso resina Gedeo
        de 10,00 €
        extra hard, high-quality alpha plaster, synthetic resin bonded, bright white, fine grained, non-clumping, mixing ratio of powder to water is 3:1; setting time is 8 – 15 minutes, demoulding time is 30 minutes,...
      • Moulding set
         
        Moulding set
        de 30,50 €
      • Guantes desechables, de látex
        3 Variedades
        Guantes desechables, de látex
        de 0,35 €
        examination gloves, lightly powdered with corn starch, good quality
      • Agente tixotropante Acrystal (espesante)
         
        Agente tixotropante Acrystal (espesante)
        de 19,90 €
        thickening agent for two component acrylic resin systems, thixotropic, no odour, non-toxic, mixing ratio (as percentage of weight): 1-2 % of the acrylic mixture.
      • TFC silicone rubber type 3 heat resistant, set
        4 Variedades
        TFC silicone rubber type 3 heat resistant, set
        de 24,90 €
        Material: Silicone rubber, Shore hardness: A 33, Color: red, Mixing ratio: 1:1 by weight
      • Funnel set
         
        Funnel set
        de 3,90 €
        Material: plastic
      • Pigmentos para resina acrílica Acrystal
        5 Variedades
        Pigmentos para resina acrílica Acrystal
        de 28,50 €
        liquid paint with high pigmentation and brilliancy for colouring the two component acrylic resin system, non-fading, solvent-free, odourless
      • Spray de silicona Weicon
         
        Spray de silicona Weicon
        de 6,90 €
        Contents: 400 ml, Colour: transparent
      • Vaselina de desmoldeo Gedeo
         
        Vaselina de desmoldeo Gedeo
        de 3,70 €
        Viscosity: low viscosity, Contents: 75 ml, Colour: transparent
      • Formenbau pouring box frame, adjustable, set
        2 Variedades
        Formenbau pouring box frame, adjustable, set
        de 19,90 €
        Material: Aluminium, Aluminium folded sheet: 4 pieces, each 100 mm x 200 mm x 50 mm, Aluminium base plate: 1 piece at 200 mm x 200 mm
      Esto es Modulor
      Modulor Newsletter
      Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information