0
Cesta de compra
My Account
B2B
Tienda
      Categories
      Productos
      searching for products ...
      There is no result for »askldhasd«.
      HomeMoldeadoModificaciones

      Modificaciones

      Further info

      Grupo de color

      Marca

      Price

      37 article   /   87 Variants
      Page 1 of 2
      Sort by: Relevance
      • Relevance
      • Topseller
      • Price - lowest first
      • Price - highest first
      View
      • Alpa Sil EH 10:1
        addition-crosslinked precison silicone rubber mould material, medium soft (26 - 28 Sh-A), highly elastic, good mechanical stability, low viscosity (pours well), cures to an opaque light blue colour, mixing ratio of...
        4 Variants
        Alpa Sil EH 10:1
        from 10,50 €
      • Jeringas y cánulas dosificadoras
        for applying glue in the form of dots (especially Ruderer plastic glue)
        6 Variants
        Jeringas y cánulas dosificadoras
        from 0,20 €
      • Tintes para resinas sintéticas
        highly pigmented, intense pigment pastes that can be mixed together for colouring polyurethane, polyester and epoxy resins, is either capable of flowing or a paste depending on the colour, density at room temperature...
        7 Variants
        Tintes para resinas sintéticas
        from 4,80 €
      • Resina de PUR para colada/moldes U1404
        2 component casting resin, without fillers, soft to medium hard (approx. 40 to 80 Sh.A), extremely elastic, very good mechanical stability, very low viscosity (pours well), material is reddish opaque when cured,...
        5 Variants
        Resina de PUR para colada/moldes U1404
        from 27,80 €
      • Espátula de madera para mezclas
        l = 150 mm, w = 20 mm, for stirring resin preparations of up to about 500 g
        2 Variants
        Espátula de madera para mezclas
        from 0,95 €
      • Masa de moldeado universal de alginato
        quick-setting powered casting material, made from algae extracts, little mechanical stability, high viscosity (does not pour), odorless, cures to an opaque brown colour, mixing ratio of powder to water is 1:2,...
        2 Variants
        Masa de moldeado universal de alginato
        from 8,80 €
      • Leche de látex
        natural rubber-based air drying single component casting material (dispersion), pre-vulcanized with ammonia (0.3%), very soft (no Sh-A data available), extremely elastic, very low viscosity, cures to a translucent...
        3 Variants
        Leche de látex
        from 9,20 €
      • Vasos de mezclas, de polietileno
        polyethylene single-use mixing cups (HDPE), translucent, colourless, opening diameter: 82 mm (250 ml), 106 mm (600 ml), inner walls and bottom are smooth
        2 Variants
        Vasos de mezclas, de polietileno
        from 4,90 €
      • Pasta de látex
        natural rubber based air drying single component casting material (dispersion), pre-vulcanized with ammonia, medium hard, very elastic, very high viscosity (can be brushed and troweled), cures to a opaque amber...
        2 Variants
        Pasta de látex
        from 14,60 €
      • Agente desmoldeante, baja viscosidad, soluble agua
        dyed to a reddish colour, polyvinyl alcohol-based; resistant to numerous solvents, styrol and benzene; ready-to-use, apply with cloth or brush, flash-off time: 15-20 minutes, Xi (= irritant), F (= highly flammable)
         
        Agente desmoldeante, baja viscosidad, soluble agua
        from 4,60 €
      • Köraform K 31 100:2
        condensation-crosslinked silicone rubber moulding material, medium soft (ca. 23 Sh-A), highly elastic, very high degree of mechanical rigidity, low-viscosity (pourable), white and opaque when cured; mixing ratio of...
        2 Variants
        Köraform K 31 100:2
        from 10,50 €
      • Látex Gedeo
        air-curing, one-component, natural rubber based moulding material, pasty consistency, extremely elastic, applied in 4 layers, drying time is 6 hours
         
        Látex Gedeo
        from 19,00 €
      • Alpa Megaplast 1:1
        addition-crosslinked precison casting silicone, medium hard (approx. 35 Sh-A), elastic, relatively little mechanical stability, very high viscosity (pasty, kneadable), cures to an opaque skin colour, mixing ratio of...
        2 Variants
        Alpa Megaplast 1:1
        from 16,90 €
      • Alpa Sil V 66 1:1
        addition-crosslinked precison casting silicone, medium hard (25 Sh-A), highly elastic, good mechanical stability, very high viscosity (can be brushed and troweled), cures to an opaque green colour, mixing ratio of...
        2 Variants
        Alpa Sil V 66 1:1
        from 33,00 €
      • Protosil RTV 245 silicone
        addition-crosslinked precision silicone for moulds, medium hard (app. 42 Sh-A), highly elastic, very high degree of stability, high viscosity (limited pourability), when cured the material is transparent, mixing...
        4 Variants
        Protosil RTV 245 silicone
        from 11,90 €
      • Pasta de silicona para moldear Gedeo Siligum
        quick setting two-component silicone moulding paste for making casting moulds for small and flat objects using plaster, casting resin, wax, etc., very pasty consistency (kneadable), light blue appearance, mixing ratio...
        2 Variants
        Pasta de silicona para moldear Gedeo Siligum
        from 14,00 €
      • Recipiente de goma para mezclar yeso
        elastic soft plastic, black, round, ø 130 mm
         
        Recipiente de goma para mezclar yeso
        from 0,95 €
      • Aceite de silicona V50
        polydimethyl siloxane, low viscosity (50 mPa), colourless, density is 0.95 g/cm³
         
        Aceite de silicona V50
        from 9,90 €
      • Neukasil RTV 22 F
        Shore hardness
        soft, ca. 22 Sh-A
        Colour
        opaque beige-red when hardened
        Mixing rati ...
        1:1
        Pot life
        ca. 5 minutes
        4 Variants
        Neukasil RTV 22 F
        from 52,80 €
      • Cera desmoldeante, pastosa
        wax dispersion with paste consistency, silicone-free, halogen-free, colourless when dried, ready-to-use for application with brush or rag, flash-off time: 15-20 minutes, polishes well, uses 50 – 100 g per sq....
         
        Cera desmoldeante, pastosa
        from 3,60 €
      • Köraform A 50 T 10:1
        addition-crosslinked precison casting silicone that is temperature-resistant (short term up to 250 °C), medium hard (approx. 43 Sh-A), highly elastic, good mechanical stability, low viscosity (pours well), cures to...
        2 Variants
        Köraform A 50 T 10:1
        from 14,90 €
      • Guantes desechables, de látex
        examination gloves, lightly powdered with corn starch, good quality
        3 Variants
        Guantes desechables, de látex
        from 0,35 €
      • Air-cured mould making compound
         
        Air-cured mould making compound
        from 5,70 €
      • Polvo de talco
        white
         
        Polvo de talco
        from 2,20 €
      • Spray desmoldeante y aislante Sep Super
        modern universal release-, insulation- and lubrication agent, contains silicone, can be painted over, colourless when dry, does not built layers (polishing not necessary), airing evaporation time is 5 - 10 minutes,...
         
        Spray desmoldeante y aislante Sep Super
        from 23,50 €
      • Spray de silicona Weicon
        hazard warnings: Xi irritant, F+ extremely flammable, N dangerous for the environmentP>
         
        Spray de silicona Weicon
        from 6,60 €
      • Cera desmoldeante 965, baja viscosidad
        low viscosity wax dispersion, silicone-free, halogen-free, milky colour when dry, ready-to-use for spraying or brushing, air evaporation time is 30 minutes, polishes up well, consumes approx. 70 g per m² when...
         
        Cera desmoldeante 965, baja viscosidad
        from 14,40 €
      • Vaselina de desmoldeo Gedeo
         
        Vaselina de desmoldeo Gedeo
        from 3,70 €
      • Moulding set
         
        Moulding set
        from 30,50 €
      • Gafas de protección estándares
        polycarbonate, with integral side protection, can also be worn as overglasses
         
        Gafas de protección estándares
        from 4,00 €
      • Neukasil RTV 29
        addition-crosslinked precision silicone for moulds, very soft (app. 30 Sh-00), highly elastic, high mechanical stability, very low viscosity (good pourability), when cured the material is opaque white, mixing ratio...
        4 Variants
        Neukasil RTV 29
        from 11,90 €
      • Pigmentos para siliconas
        highly concentrated pigment paste for colouring silicone casting material, non-poisonous
        7 Variants
        Pigmentos para siliconas
        from 18,50 €
      • Alpa Tix A
        thixotropic agent for addition-crosslinked RTV-2 silicone (yellowish liquid), dosage is 0.2% of the whole amount, density at 23 °C is 1.03 g/cm³, viscosity is approx. 1.500 mPa, shelf life with proper storage is at...
         
        Alpa Tix A
        from 22,20 €
      • Funnel set
        Material
        plastic
         
        Funnel set
        from 3,90 €
      • Alpa Tix C
        thixotropic agent for condensation-crosslinked RTV-2 silicone (yellow-orange liquid), dosage is 2 % of the whole amount, density at 23 °C is 1.04 g/cm³, viscosity is approx. 150 mPa, shelf life with proper storage...
         
        Alpa Tix C
        from 21,80 €
      Page 1 of 2
      This is Modulor
      Modulor Newsletter
      Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information