glossy, polyester film, th = 0.07 mm, heat stabilized, one side self-adhesive, silicone release paper (no slit), tear resistant and waterproof, lightfast, for colour copiers and colour laser printers (B&W too)
The SC 42 laser adhesive film is not only great for use with all black-and-white machines but also satisfies all the requirements for use with the newest colour copiers and colour laser printers. The relatively thick release paper provides it with excellent flatness and also helps to prevent paper jamming. The adhesive was specially developed for use with high temperatures, which means that during heat intensive copying work it will not run out past the edges. This film can be used universally indoors as well as outdoors at temperatures between +5°C and +80°C for up to 12 months. In order to remove the film, a hair dryer or HOT AIR GUN should be used to warm it up before pulling it off.
This transparent, glossy film is suitable for, among other things, making basic signs which can then be glued to glass or acrylic glass without having to worry about compromising their transparency very much (wet gluing). It can be written on with film pens or permanent markers (e.g. STAEDLER LUMOCOLOR) and is invisible in the blueprinting process as well as on copies.