| Location in Store | EGI09B |
|---|---|
| Article No. | 0297067 |
2-component epoxy resin casting material, transparent and colourless, mixing ratio of resin to water is 2:1, curing time: 6 hours for the surface, 12 hours for the core, shelf life when properly stored: minimum of 6 months (both the resin and the hardener), freezing temperatures should be avoided; comes with 1 protective pair of gloves, 2 measuring beakers, 2 stirring spatulas
Gedeo glazing resin is a highly transparent casting resin for producing glazing that is about 2 mm thick on even surfaces like postcards, photos, boxes, broshures, furniture or even textiles. The thick coating has a magnifying effect on the motif beneath it and produces beautiful rounded edges.
Processing: The amount necessary for you job can be calculated in this way: length x width x 2 (in millimeters). Start by putting 1 part of hardener B in a clean, dry container, then adding 2 parts of resin A. The two components must be carefully but thoroughly stirred and mixed (note: if the components are not completely mixed together the hardening will be impaired while too aggressive stirring of the mixture will cause bubbles to form). The properly mixed components are then poured into a second container and stirred once again in order to assure a homogenous resin that will be optimally hardened. Starting at the edges, the mixture should be then poured onto your object, which should be lying flat. The very viscous coating will naturally spread out over the entire area. The resin must then be allowed to dry while being protected against dust and dirt for 24 hours until it has completely hardened. When working with Gedeo glazing resin it is important to wear protective gloves and to avoid any contact with your skin or eyes.
Achtung, (VOC-Gehalt = 0,0 %), BISPHENOL-A-EPICHLORHYDRINHARZE MIT DURCHSCHNITTLICHEM MOLEKULARGEWICHT <= 700 = 50 <= < 100 %, DÉRIVÉS ÉPOXYDIQUES = 25 <= < 50 %, Augenreizung, Kategorie 2 (Eye Irrit. 2), Chronisch gewässergefährdend, Kategorie 2 (Aquatic Chronic 2), Reizwirkung auf die Haut, Kategorie 2 (Skin Irrit. 2), Sensibilisierung der Haut, Kategorie 1 (Skin Sens. 1)
- EUH205: Contains epoxy constituents. May produce an allergic reaction.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H411: Toxic to aquatic life with long lasting effects.
- P101: If medical advice is needed, have product container or label at hand.
- P102: Keep out of reach of children.
- P261: Avoid breathing dust / fume / gas / mist / vapours / spray.
- P272: Contaminated work clothing should not be allowed out of the workplace.
- P280: Wear protective gloves / protective clothing / eye protection / face protection.
- P321: Specific treatment (see … on this label).
- P337+P313: If eye irritation persists: Get medical advice / attention.
- P501: Dispose of contents / container to …
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 79 €.
5,95 € shipping costs, if order value is less than 79 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 79 €
Express and forwarding shipping
From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.