PUR quick casting resin G26

G26 is a versatile two-component system with very fine textures which can be used for quick casting of models, trial moulds, shaped pieces, artistic commercial articles and pieces of small to medium size.

Its low viscosity allows it to be poured easily and to be used for intricate shapes. Because of its somewhat longer working life, there is time to allow the escape of air bubbles before the pouring begins. Layers of G26 that have been poured one after the other with 5 minute intervals bind to one another very well. It has a short de-moulding time and very little shrinkage. Depending upon the thickness of the poured piece, it can be de-moulded after 30 minutes (thickness less than 10 mm) or up to 45 minutes (thickness more than 10 mm).

Because of its low viscosity in combination with high wettability, the quick casting resin G26 is able to handle a large amount of FILLER. Filler types and amounts can be chosen according to the intended use, be it for casting in thin or thick layers or also for making putty. For pouring thicker layers (over 20 mm), a ratio of 300 parts filler to 100 parts each of resin and hardener can be employed; for thinner layers no more that 200 parts filler should be added.

As compared to G27, the G26 quick casting resin distinguishes itself by its high impact resistance and elongation at tear. When cured, the G26 lends itself very well to mechanical workability.

In order to influence the working life and the mechanical attributes of G26, the G27 hardener can be mixed in with it.