|
Modulor GmbH
Prinzenstr. 85 10969 Berlin Tel. +49 (0)30 69036-0 Fax +49 (0)30 69036-445 www.modulor.de |
 |
Lamiere d'alluminiomedium hard, smooth, sizes from th = 0.5 mm with protective film |
|
ask about the prices for whole sheets
|
|
| 125966S | 0,3 x 250 x 250 mm | 2,50 €/Stück |
| 125966V | 0,3 x 250 x 250 mm | 39,90 €/Pack. 25 St. |
| 125984S | 0,3 x 250 x 500 mm | 4,80 €/Stück |
| 125984V | 0,3 x 250 x 500 mm | 59,90 €/Pack. 20 St. |
| 125993S | 0,5 x 250 x 250 mm | 2,90 €/Stück |
| 125993V | 0,5 x 250 x 250 mm | 39,90 €/Pack. 25 St. |
| 126009S | 0,5 x 250 x 500 mm | 5,20 €/Stück |
| 126009V | 0,5 x 250 x 500 mm | 59,90 €/Pack. 20 St. |
| 126018 | 0,5 x 1000 x 2000 mm | 29,50 €/m² |
| 126027S | 1,0 x 250 x 250 mm | 4,00 €/Stück |
| 126027V | 1,0 x 250 x 250 mm | 49,00 €/Pack. 20 St. |
| 126036S | 1,0 x 250 x 500 mm | 6,90 €/Stück |
| 126036V | 1,0 x 250 x 500 mm | 48,00 €/Pack. 10 St. |
| 126045 | 1,0 x 1000 x 2000 mm | 42,50 €/m² |
| 126054S | 1,5 x 250 x 250 mm | 5,10 €/Stück |
| 126054V | 1,5 x 250 x 250 mm | 61,00 €/Pack. 20 St. |
| 126063S | 1,5 x 250 x 500 mm | 8,50 €/Stück |
| 126063V | 1,5 x 250 x 500 mm | 59,50 €/Pack. 10 St. |
| 126072 | 1,5 x 1000 x 2000 mm | 58,00 €/m² |
| 126081S | 2,0 x 250 x 250 mm | 6,50 €/Stück |
| 126081V | 2,0 x 250 x 250 mm | 46,00 €/Pack. 10 St. |
| 126090S | 2,0 x 250 x 500 mm | 10,50 €/Stück |
| 126090V | 2,0 x 250 x 500 mm | 39,50 €/Pack. 5 St. |
| 126107 | 2,0 x 1000 x 2000 mm | 75,00 €/m² |
In model making, these sheets can be used to represent, for example, metal facades or bodies of water. They can also be used in the production of jewellery, for making signs or as reflecting surfaces.
For cutting thinner sheets, a blade or a scissors will suffice; for thicknesses over 0.5 mm, a saw or tin snips will do the job. Aluminium sheet can be successfully glued with two component glue like, for example, those based on cyanoacrylate; in model making, UHU HARD can also be used.
Please note that no exchange is possible in the case of products cut from rolls and pre-cut pieces.
Custom cut aluminium sheets can end up being lightly scratched on one side (in 0.3 mm thickness on both sides) because only one side is covered with a protective film. We cannot give more precise information as to the configuration of the sheets.