Elastomeri sintetici

Lastra di tenuta in gomma piena, nera

NR-SBR, smooth/smooth, without reinforcing insert, approx. 65 Sh-A

Lastra di silicone traslucido, incolore

smooth/smooth, without reinforcing insert, approx. 60 Sh-A, elongation at tear approx. 300%, temperature resistant from -60 °C to 230 °C, food safe according to EN 1935/2004, electrically insulating, weather-proof, UV resistant, talc-powdered

Lastra di silicone, non traslucida, colorata

smooth/smooth, without reinforcing insert, approx. 60 Sh-A, elongation at tear approx. 300%, temperature resistant from -60 °C to 230 °C, foof safe according to EN 1935/2004, electrically insulating, weather-proof, UV resistant, talc-powdered

Solid rubber bed covering

Natural rubber, smooth/smooth, with cornflower, tear-proof to at least 8.0 N/mm², percentage elongation at break at least 350%, temperature resistant from -30 °C to +80 °C (short term up to +110 °C), skin-friendly, resistant to thinned acids and lyes, sterilization is possible at 90 °C.

Foglio di gomma piena a scanalature sottili

NR-SBR, textured/cotton impression, without reinforcing insert, h = 3.0 mm, textural configuration lengthwise, s(pacing) = 3.0 mm, approx. 65 Sh-A

Foglio di gomma piena a scanalature larghe

NR-SBR, textured/cotton impression, without reinforcing insert, h = 3.0 mm, textural configuration lengthwise, Strukturabstand s = 9.0 mm, approx. 65 Sh-A

Foglio isolante in gomma, nero

EPDM (ethylene propylene diene monomer ((M-class)), both sides fabric-textured, weather-resistant, approx. 60 Sh-A, certified per DIN EN 13501-1; Euroclass E, conforms to DIN 4102-1: construction material grade B2 (normal flammability)

TPE film

SEBS (stryrene-ethylene/butylene-styrene), both sides somewhat rough textured, app. 50 Sh-A, elongation at tear app. 600%, temperature resistant from -50 °C to +100 °C (unstretched material), food safe conforming to EN1935/2004 (EU directive), withstands effects of weather well, UV resistant, good chemical resistance (except organic solvents, organic oils), 100% recyclable, usable width = app. 400 mm

Importante!

Please note that no exchange is possible in the case of products cut from rolls.

Informazioni generali su Elastomeri sintetici

The designation "Sh-A" or, alternatively, "Sh-D" stands for Shore Hardness, which is a scale of hardness for elastomers and plastics. In the case of softer, rubber type materials, the A scale is used, while for harder materials the D scale. The test procedure, which is standardized per DIN 53505 and DIN 7868 (German Industry Norm), consists of a tempered steel indenter, whose shape varies for the A and D scale tests, being pressed into a material with a specific force whereby the amount of penetration is measured. The measuring scale goes from 0 (complete penetration) to 100 (no penetration) - the higher the number, the harder the substance.