Cutter for exact 90° cuts in sandwich panels with 3 – 10 mm thicknesses, plastic housing with flexible cutting head, adjustable blade depth, on-board blade storage drawer, blade holder with set screw and magnetic blade slot for positioning help, can be used with Logan Adapt-A-Rule straight edge
for sandwich panels up to 10 mm thick!
FoamWerks cutting tools were developed to provide a way for precisely reworking sandwich panels with paper cover layers like KAPA BOARDS or FOAM BOARDS. The various tools make it possible to make exact 90° or 45° cuts, to cut circles up to 150 mm in diameter or to punch out holes from 4.5 to 19 mm in diameter. In the realm of architectural model making, the RABBET CUTTER is particularly useful because you can cut a sandwich panel in such a way that the paper cover layer remains uncut on one side. In addition, the V-GROOVE CUTTER is great for this work as well because it can cut a series of “V” shaped grooves in order to shape the board into a curve. All these tools are distinguished by their easy handling and precise cuts and are also suitable for working on STYROPOR and POLYSTYRENE RIGID FOAM BOARDS.
FoamWerks is a product line from the American company Logan, which, especially in the realm of professional tools for passepartout production, is a world market leader. Logan passepartout tools can be found under PASSEPARTOUT CUTTER.
The FoamWerks straight cutter allows you to make exact 90° cuts in sandwich panels with cover layers (KAPA, FOAMBOARD), styropor or polystyrene rigid boards with thicknesses up to 10 mm. The cutter, which has a large base, can be used with every type of straight edge; best, however, is the LOGAN ADAPT-A-RULE STRAIGHT EDGE that has a guide groove within which you can engage the straight cutter on both the right and left sides. The depth of the blade can be continuously adjusted to the required level. The right replacement blades, Type WC, can be found under FOAMWERKS REPLACEMENT BLADES.
You should always use a scrap piece of foam board underneath the piece you are cutting. The cutting mats made out of PVC that we usually strongly recommend as cutting underlays are too hard and too dense for use with the sensitive blades in FoamWerks tools.
