Ofertas
|
Página 1 / 2
|
1
2
|
|
colourless transparent illuminant, distance between the bulbs is 15 cm, electrical cord l = 1.5 m (up to the first bulb), circular configuration of the bulbs (cable is not twisted), not resistant to moisture, for 230 V, includes replacement bulbs, GS-mark (German "Tested Safety" certification mark)
|
|
white 99532, semi-gloss/glossy, both sides with protective film
for model making
|
|
translucent, colourless, both sides with matte finished surface
especially used in lighting media...
|
|
glossy/glossy, both sides with protective film
used in light boxes, etc.
|
|
glossy/glossy, both sides with protective film
many colours
|
|
for brochure covers, projecting screens…
|
|
hard and flexible
|
|
for UV-offset printing
|
|
matte/semi-gloss, corona treated
|
|
transparent, coloured, glossy/glossy, carrier material is polyester, both sides abrasion resistant, coated with flame-retardant per BS 3944 standard (describing flammability and dimensional stability for filters)
Bogenware
|
|
milky white, matte/matte, calendered, largely free from flow marks, light transmission: 55 %
for light boxes and lamps
|
|
milky white, self-adhesive/matte, polymer plasticized PVC, th = approx. 0.085 mm, solvent free acrylate adhesive (adhesive strength ≥ 4N), silicon paper backing, tube inner ø 76 mm
light box foil
|
|
self-adhesive/matte, rigid-PVC, th = 0.3 mm, antistatic, solvent free acrylate adhesive (adhesive strength ≥ 4N), silicon cardboard backing
sturdy rigid-PVC film
|
|
transparent, colourless, glossy, rigid-PVC, th = 0.2 mm, solvent and acid free acrylate adhesive (adhesive strength: rolls, ca. 6 N/25 mm upon application and ca. 12.5 N/25 mm after 1 week; sheets, ca 10 N/25 mm initial strength, ca. 15 N/25 mm after 24 hours), it can be written on, PE film liner (one side is siliconized)
comes in rolls and sheets!
|
|
transparent, colourless, matte, rigid-PVC, th = 0.21 mm, solvent and acid free acrylate adhesive; adhesive strength: ca. 10 N/25 upon application and 15 N/25 mm after 24 hours), can be written on, PE film liner (one side is siliconized)
matte and highly transparent
|
|
colourless, translucent, matte finished surface, given dimensions: outer diameter x inner diameter
for lighting design ...
|
|
for flourescent tubes (three-quarter tube), transparent, glossy, given dimensions: outer diameter x wall thickness
for fluorescent tubes
|
|
translucent, solid colour, wood free, from 100% cellulose, smooth, conditionally suitable for ink-jet and laser printer (b/w)
|
|
colourless transparent paper, translucent, wood free, from 100% cellulose, smooth, one side printed with various colourful patterns, accepts laser and copying print, conditionally suitable for ink-jet printer (see information), with metallic iridescent surface effect, straight flap (self-adhesive)
beautiful with lighting
|
|
matte/matte, with fibre imprint, th=app. 0.3 mm, 330g/m²
|
|
white, diaphanous, pulp (wood pulp) reinforced with synthetic fibre, both sides coated in PVC, linen texture, extremely tear resistant, washable, flame resistant, 930 X 2450 is rolled up
tear resistant and washable
|
|
very high quality
|
|
e.g. for model making
|
|
square mesh netting, rust-free stainless steel wire
rust-free
|
|
stamped fabric, single-layered, nub height = 10 mm, nub diameter approx. 14 mm (RG 14/28)
for lighting design
|
|
Three-dimensionally shaped mixed fibre non-woven material, 50% kenaf/hemp/flax, 50% polypropylene, course, hard, nub height = 11 mm, nub diameter app. 14 mm (RS 14/28 = round nub 14 mm diameter/square pitch with 28 mm spacing)
made from renewable raw materials
|
|
100% coloured spun rayon fabric, reverse side is acid-free, white paper carrier 30 g/m², not calendered, fabric configuration: warp 23.0 threads/cm, weft 21.7 threads/cm, usable width = 1320 mm
|
Página 1 / 2
|
1
2
|
|
|
