Ofertas
|
|
addition-crosslinked precison casting silicone, medium hard (approx. 35 Sh-A), elastic, relatively little mechanical stability, very high viscosity (pasty, kneadable), cures to an opaque skin colour, mixing ratio of component A to B is 1:1, working life is approx. 2 minutes, de-moulding time is approx. 5 minutes, shelf life ...
kneadable, short working time, for bodycasts
|
|
condensation-crosslinked casting silicone, very soft (12 Sh-A), highly elastic, good mechanical stability, low viscosity (pours well), cures to an opaque white colour, mixing ratio of component A to B is 100:5, working life is approx. 120 minutes, de-moulding time is approx. 24 hours, shelf life with proper storage is at least ...
very soft
|
|
condensation-crosslinked casting silicone, soft (18 Sh-A), highly elastic, good mechanical stability, low viscosity (pours well), cures to an opaque white colour, mixing ratio of component A to B is 100:2, working life 80 minutes, de-moulding time is approx. 18 hours, shelf life with proper storage is at least 12 months, hazard ...
highly elastic
|
|
condensation-crosslinked casting silicone, medium soft (25 Sh-A), highly elastic, very good mechanical stability, low viscosity (pours well), cures to an opaque white colour, mixing ratio of component A to B is 100:5, working life is 90 - 150 minutes, de-moulding time is approx. 24 hours, shelf life with proper storage is at ...
for complicated castings
|
|
thixotropic agent for condensation-crosslinked RTV-2 silicone (yellow-orange liquid), dosage is 2 % of the whole amount, density at 23 °C is 1.04 g/cm³, viscosity is approx. 150 mPa, shelf life with proper storage is at least 12 months, hazard warning: Xn harmful
for condensation-crosslinked silicone
|
|
highly concentrated pigment paste for colouring silicone casting material, non-poisonous
a small amount goes a long way
|
|
polydimethyl siloxane, low viscosity (50 mPa), colourless, density is 0.95 g/cm³
|
|
natural rubber based air drying single component casting material (dispersion), pre-vulcanized with ammonia (0.3%), very soft (no Sh-A data available), extremely elastic, very low viscosity, cures to a translucent amber colour, pH value 8-9, shelf life with proper storage (20 °C) is at least 24 months
for flexible moulds
|
|
natural rubber based air drying single component casting material (dispersion), pre-vulcanized with ammonia, medium hard, very elastic, very high viscosity (can be brushed and troweled), cures to a opaque amber colour, shelf life with proper storage (20 °C) is at least 24 months
can be applied with a brush (pasty)
|
|
quick-setting powered casting material, made from algae extracts, little mechanical stability, high viscosity (does not pour), odorless, cures to an opaque brown colour, mixing ratio of powder to water is 1:2, working life is approx. 3 minutes, de-moulding time is approx. 8 minutes, skin contact is OK
for body castings
|
|
|
